Home Page
Counties
Broward
33309
C.A. PRECISION, INC.

C.A. PRECISION, INC. - Florida Company Profile

Company Details

Entity Name:	C.A. PRECISION, INC.
Jurisdiction:	FLORIDA
Filing Type:	Domestic Profit C.A. PRECISION, INC. is structured as a Domestic Profit Corporation, which, in Florida signifies a Profit Corporation (also known as a C-Corporation). This business structure is recognized as a separate legal entity from its owners. This offers shareholders the benefit of limited liability protection, safeguarding their personal assets from the corporation's debts and obligations, and facilitates raising capital through the issuance of stock. In Florida, Domestic Profit Corporations are governed by Title XXXVI, Chapter 607, Florida Statutes – Florida Business Corporation Act.
Status:	Inactive The business entity is inactive. This status may signal operational issues or voluntary closure, raising concerns about the business's ability to repay loans and requiring careful risk assessment by lenders.
Date Filed:	23 Apr 1991 (34 years ago)
Date of dissolution:	22 Sep 2017 (8 years ago)
Last Event:	ADMIN DISSOLUTION FOR ANNUAL REPORT
Event Date Filed:	22 Sep 2017 (8 years ago)
Document Number:	S47228
FEI/EIN Number	650277910 Federal Employer Identification (FEI) Number assigned by the IRS.
Address:	1004 NW 51 PLACE, FORT LAUDERDALE, FL, 33309
Mail Address:	1004 NW 51 PLACE, FORT LAUDERDALE, FL, 33309
ZIP code:	33309
County:	Broward
Place of Formation:	FLORIDA

Key Officers & Management

Name	Role	Address
Antunez Celio	Director	101 NE 46TH STREET, FT. LAUDERDALE, FL, 33334
ANTUNEZ, CELIO	Agent	101 N.E. 46TH STREET, FT. LAUDERDALE, FL, 33334
ANTUNEZ, ANTONIA	Treasurer	101 NE 46 ST, FT. LAUDERDALE, FL, 33334

Events

Event Type	Filed Date	Value	Description
ADMIN DISSOLUTION FOR ANNUAL REPORT	2017-09-22	-	-
CHANGE OF PRINCIPAL ADDRESS	2001-04-25	1004 NW 51 PLACE, FORT LAUDERDALE, FL 33309	-
CHANGE OF MAILING ADDRESS	2001-04-25	1004 NW 51 PLACE, FORT LAUDERDALE, FL 33309	-

Documents

Name	Date
ANNUAL REPORT	2016-02-03
ANNUAL REPORT	2015-03-10
ANNUAL REPORT	2014-03-11
ANNUAL REPORT	2013-04-12
ANNUAL REPORT	2012-04-10
ANNUAL REPORT	2011-04-29
ANNUAL REPORT	2010-04-08
ANNUAL REPORT	2009-04-27
ANNUAL REPORT	2008-04-18
ANNUAL REPORT	2007-05-03
ANNUAL REPORT	2006-05-03
ANNUAL REPORT	2005-04-29
ANNUAL REPORT	2004-04-30
ANNUAL REPORT	2003-04-30
ANNUAL REPORT	2002-04-30
ANNUAL REPORT	2001-04-25
ANNUAL REPORT	2000-04-27
ANNUAL REPORT	1999-05-03
ANNUAL REPORT	1998-04-16
ANNUAL REPORT	1997-05-12

OSHA's Inspections within Industry

Inspection Nr

Report ID

Date Opened

Site Address

342335528

0418800

2017-05-18

1004 NW 51 PLACE, FORT LAUDERDALE, FL, 33309

Inspection Type	Referral
Scope	Partial
Safety/Health	Safety
Close Conference	2017-05-18
Emphasis	N: AMPUTATE, L: FORKLIFT
Case Closed	2018-05-31

Related Activity

Type	Referral
Activity Nr	1215632
Safety	Yes

Type	Inspection
Activity Nr	1198816
Health	Yes

Violation Items

Citation ID	01001
Citaton Type	Serious
Standard Cited	19100212 A03 II
Issuance Date	2017-06-27
Abatement Due Date	2017-07-12
Current Penalty	1901.5
Initial Penalty	3803.0
Final Order	2017-07-14
Nr Instances	8
Nr Exposed	1
Gravity	10
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a. On or about 5/18/2017, at the workshop of the above addressed jobsite, a drill press (i.e. Rockwell 15-801, Serial #176463) that lacked a guard on its point of operation, exposing employees to a caught by hazard. b. On or about 5/18/2017, at the workshop of the above addressed jobsite, a drill press (i.e. Rockwell 15-801, Serial #1753662) that lacked a guard on its point of operation, exposing employees to a caught by hazard. c. On or about 5/18/2017, at the workshop of the above addressed jobsite, a drill press (i.e. Uniteg, Model 510, Serial #12191) lacked a guard on its point of operation, exposing employees to a caught by hazard. d. On or about 5/18/2017, at the workshop of the above addressed jobsite, a drill press (i.e. Delta, Serial # 9113) lacked a guard on its point of operation, exposing employees to a caught by hazard. e. On or about 5/18/2017, at the workshop of the above addressed jobsite, an employee was exposed to a caught by hazard while working with a milling machine (i.e. MSG, No serial number available) that lacked a guard on its point of operation. f. On or about 5/18/2017, at the workshop of the above addressed jobsite, an employee was exposed to a caught by hazard while working with a milling machine (i.e. Bridgeport, No serial number available)that lacked a guard on its point of operation. g. On or about 5/18/2017, at the workshop of the above addressed jobsite, an employee was exposed to a caught by hazard while working with a lathe (i.e. Leblond, Model B7137) that lacked a guard on its point of operation. h. On or about 5/18/2017, at the workshop of the above addressed jobsite, an employee was exposed to a caught by hazard while working with a bandsaw (i.e. Delta) which lacked a guard over the unused portion of the blade.

Citation ID	01002
Citaton Type	Serious
Standard Cited	19100212 B
Issuance Date	2017-06-27
Abatement Due Date	2017-07-05
Current Penalty	815.0
Initial Penalty	1630.0
Final Order	2017-07-14
Nr Instances	2
Nr Exposed	1
Gravity	1
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a. On or about 5/18/2017, at the workshop of the above addressed jobsite, a drill press (i.e. Rockwell 15-801, Serial #176463) was not anchored, exposing employees to a struck by hazard. b. On or about 5/18/2017, at the workshop of the above addressed jobsite, a drill press (i.e. Rockwell 15-801, Serial #1753662) was not anchored, exposing employees to a struck by hazard.

Citation ID	01003
Citaton Type	Serious
Standard Cited	19100215 A01
Issuance Date	2017-06-27
Current Penalty	1086.5
Initial Penalty	2173.0
Final Order	2017-07-14
Nr Instances	1
Nr Exposed	1
Gravity	5
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.215(a)(1): Abrasive wheel(s) used on grinding machinery were not used with safety guard(s): On or about 3/9/2017, at the workshop area of the above addressed jobsite, an employee was exposed to a struck and caught by hazard while working with a surface grinder (i.e. Harig, Super 612) that lacked a guard.

Citation ID	01004A
Citaton Type	Serious
Standard Cited	19100215 A04
Issuance Date	2017-06-27
Current Penalty	1086.5
Initial Penalty	2173.0
Final Order	2017-07-14
Nr Instances	1
Nr Exposed	1
Gravity	5
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: On or about 5/18/2017, at the workshop area of the above addressed jobsite, an employee was exposed to a struck by hazard while working with a bench grinder (i.e. Sunex, Model 5002) that lacked work rests.

Citation ID	01004B
Citaton Type	Serious
Standard Cited	19100215 B09
Issuance Date	2017-06-27
Abatement Due Date	2017-07-05
Current Penalty	0.0
Initial Penalty	0.0
Final Order	2017-07-14
Nr Instances	1
Nr Exposed	1
Gravity	5
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: On or about 5/18/2017, at the workshop area of the above addressed jobsite, an employee was exposed to a struck by hazard while working with a bench grinder (i.e. Sunex, Model 5002) that lacked tongue guards.

Citation ID	01005
Citaton Type	Serious
Standard Cited	19100303 G02 I
Issuance Date	2017-06-27
Abatement Due Date	2017-07-05
Current Penalty	1086.5
Initial Penalty	2173.0
Final Order	2017-07-14
Nr Instances	1
Nr Exposed	1
Gravity	5
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): On or about 5/18/2017, at the workshop of the above addressed jobsite, employees were exposed to an electrical hazard while working in the proximity of live parts exposed within an electrical panelboard that lacked a cover.

Citation ID	01006
Citaton Type	Serious
Standard Cited	19100304 G05
Issuance Date	2017-06-27
Abatement Due Date	2017-07-12
Current Penalty	1086.5
Initial Penalty	2173.0
Final Order	2017-07-14
Nr Instances	1
Nr Exposed	1
Gravity	5
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: On or about 5/18/2017, at the workshop of the above addressed jobsite, a drill press (i.e. Rockwell 15-801, Serial #176463) lacked a ground prong missing on its attachment plug, exposing employees to an electrical hazard.

Citation ID	02001
Citaton Type	Other
Standard Cited	19100101 B
Issuance Date	2017-06-27
Abatement Due Date	2017-07-05
Current Penalty	0.0
Initial Penalty	0.0
Final Order	2017-07-14
Nr Instances	1
Nr Exposed	1
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.101(b): The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks were not in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in CFR 1910.6: a. On or about 5/18/2017, at the workshop of the above addressed jobsite, four argon cylinders, four oxygen cylinders and an hydrogen cylinder were stored together, exposing employees to a fire hazard. (Section 3.3.3: Where gases of different types are stored at the same location, cylinders should be grouped by types of gas, and the groups arranged to take into account the gases contained, e.g. flammable gases should not be stored near oxidizing gases.) b. On or about 5/18/2017, at the workshop of the above addressed jobsite, an argon cylinder was not capped, exposing employees to fire and explosion hazard (Section 3.3.8: Where caps are provided for valve protection, such caps should be kept on cylinders in storage.)

Citation ID	02002A
Citaton Type	Other
Standard Cited	19100219 D01
Issuance Date	2017-06-27
Abatement Due Date	2017-07-06
Current Penalty	0.0
Initial Penalty	0.0
Final Order	2017-07-14
Nr Instances	1
Nr Exposed	1
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): On or about 5/18/2017, at the workshop of the above addressed worksite, an employee was exposed to a caught by hazard while working with a polishing machine (i.e. no other info available) which had a pulley and belt on its drive mechanism which were not guarded.

Citation ID	02002B
Citaton Type	Other
Standard Cited	19100219 E03 I
Issuance Date	2017-06-27
Abatement Due Date	2017-07-06
Current Penalty	0.0
Initial Penalty	0.0
Final Order	2017-07-14
Nr Instances	1
Nr Exposed	1
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): On or about 5/18/2017, at the workshop of the above addressed worksite, an employee was exposed to a caught by hazard while working with a polishing machine (i.e. no other info available) which had a pulley and belt on its drive mechanism which were not guarded.

341988160

0418800

2016-12-20

1004 NW 51 PLACE, FORT LAUDERDALE, FL, 33309

Inspection Type	Planned
Scope	Partial
Safety/Health	Health
Close Conference	2016-12-20
Emphasis	P: CHROME6, N: CHROME6
Case Closed	2018-01-08

Related Activity

Type	Inspection
Activity Nr	1233552
Safety	Yes

Violation Items

Citation ID	01001
Citaton Type	Serious
Standard Cited	19100303 G02 I
Issuance Date	2017-06-13
Current Penalty	978.0
Initial Penalty	1630.0
Final Order	2017-07-10
Nr Instances	1
Nr Exposed	2
Gravity	1
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): On or about December 20, 2016, the employer permitted employees to plug in electrical cords to power tools and equipment into an outlet with exposed wires.

Citation ID	02001
Citaton Type	Other
Standard Cited	19100134 K06
Issuance Date	2017-06-13
Abatement Due Date	2017-07-31
Current Penalty	0.0
Initial Penalty	0.0
Final Order	2017-07-10
Nr Instances	1
Nr Exposed	1
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.134(k)(6): The basic advisory information on respirators, as presented in Appendix D of this section, shall be provided by the employer in any written or oral format, to employees who wear respirators when such use is not required by this section or by the employer: On or about December 20, 2016, the employer did not provide the information in Appendix D of this section to employees who wear filtering facepiece respirators when welding metal for metal fabrication.

Citation ID	02002
Citaton Type	Other
Standard Cited	19101026 D01
Issuance Date	2017-06-13
Abatement Due Date	2017-07-31
Current Penalty	0.0
Initial Penalty	0.0
Final Order	2017-07-10
Nr Instances	1
Nr Exposed	1
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.1026(d)(1): The employer with a workplace or work operation covered by this standard did not determine the 8-hour time-weighted average exposure for each employee exposed to chromium (VI): On or about December 20, 2017, the employer did not determine employee exposure to chromium (VI) when engaged in tasks such as welding on stainless steel metal.

Citation ID	02003
Citaton Type	Other
Standard Cited	19101200 E01
Issuance Date	2017-06-13
Abatement Due Date	2017-07-31
Current Penalty	0.0
Initial Penalty	0.0
Final Order	2017-07-10
Nr Instances	1
Nr Exposed	2
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: On or about December 6, 2016, at the above addressed jobsite, the employer did not develop a written hazard communication program for employees who use hazardous chemicals such as, but no limited to, flammable compressed gases, filler metals that produce hazardous fumes, and hazardous chemical solutions, to fabricate metal products.

Date of last update: 03 Apr 2025

Sources: Florida Department of State