|
343002200
|
0420600
|
2018-03-08
|
1210 E. FLETCHER AVE., TAMPA, FL, 33612
|
|
| Inspection Type |
FollowUp
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2018-03-08
|
| Case Closed |
2023-04-12
|
Related Activity
| Type |
Inspection |
| Activity Nr |
1243370 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100157 C04 |
| Issuance Date |
2018-09-05 |
| Abatement Due Date |
2018-09-17 |
| Current Penalty |
2439.0 |
| Initial Penalty |
2439.0 |
| Final Order |
2018-10-02 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.157(c)(4): Portable fire extinguishers were not maintained in a fully charged and operable condition: (a) For employees who work inside an automotive service shop where a portable fire extinguisher was observed discharged and missing its pin, on or about March 08, 2018 |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100157 E03 |
| Issuance Date |
2018-09-05 |
| Abatement Due Date |
2018-09-20 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-10-02 |
| Nr Instances |
2 |
| Nr Exposed |
2 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check: (a) At the repair shop, ABC Fire Extinguishers throughout had not been inspected since September 2016, on or about March 08, 2018. |
|
| Citation ID |
02001 |
| Citaton Type |
Repeat |
| Standard Cited |
19100305 B01 |
| Issuance Date |
2018-09-05 |
| Abatement Due Date |
2018-09-17 |
| Current Penalty |
207.0 |
| Initial Penalty |
207.0 |
| Final Order |
2018-10-02 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(b)(1): Conductors entering boxes, cabinets, or fittings were not protected from abrasions: (a) For an automotive hydraulic lift where conduit used for electrical wiring to provide power to the motor was observed with black tape covering openings, exposing it to abrasions, on or about March 08, 2018. The Bigmechanic.com, Inc. dba The Original Muffler City, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.305 (b)(1), which was contained in OSHA inspection number 1242726, citation number 02, item number 004 and was affirmed as a final order on 10/23/2017, with respect to a workplace located at 815 E. Hillsborough Ave. Tampa, FL 33604. |
|
| Citation ID |
03001 |
| Citaton Type |
Other |
| Standard Cited |
19100101 A |
| Issuance Date |
2018-09-05 |
| Abatement Due Date |
2018-09-17 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-10-02 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.101(a): The employer did not determine that compressed gas cylinders under his control were in a safe condition to the extent that can be determined by visual or other inspections conducted as prescribed in the Hazardous Materials Regulations: a) For employees cutting metal pipe while using compressed oxygen and acetylene cylinders with a broken regulator gauge, on or about March 08, 2018. |
|
| Citation ID |
03002 |
| Citaton Type |
Other |
| Standard Cited |
19100134 C02 I |
| Issuance Date |
2018-09-05 |
| Abatement Due Date |
2018-09-17 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-10-02 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible: a) For employees using a disposable respirator while cutting and sanding rusty metal, on or about March 08, 2018 |
|
| Citation ID |
03003 |
| Citaton Type |
Other |
| Standard Cited |
19100157 G01 |
| Issuance Date |
2018-09-05 |
| Abatement Due Date |
2018-09-20 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-10-02 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.157(g)(1): An educational program was not provided for all employees to familiarize them with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting: (a) For employees required to use ABC Fire Extinguishers to extinguish fires while working in the automotive shop area, on or about March 08, 2018. |
|
| Citation ID |
03004 |
| Citaton Type |
Other |
| Standard Cited |
19100305 E01 |
| Issuance Date |
2018-09-05 |
| Abatement Due Date |
2018-09-17 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-10-02 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(e)(1): Cabinets, cutout boxes, fittings, boxes, and panelboard enclosures in wet locations were not weatherproof: (a) For employees using a 3 HP, 220 volt automotive hydraulic lift motor, with a missing cover over its push button control in an open shop area, on or about March 08, 2018. |
|
|
|
343000626
|
0420600
|
2018-03-08
|
815 E. HILLSOBOROUGH AVE., TAMPA, FL, 33604
|
|
| Inspection Type |
FollowUp
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2018-03-08
|
| Case Closed |
2023-04-12
|
Related Activity
| Type |
Inspection |
| Activity Nr |
1242726 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100101 B |
| Issuance Date |
2018-09-05 |
| Abatement Due Date |
2018-09-17 |
| Current Penalty |
7114.0 |
| Initial Penalty |
7114.0 |
| Final Order |
2018-09-28 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.101(b): The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks were not in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in CFR 1910.6: a) For an argon cylinder being stored inside a shop made cart at an angle with its valve unprotected from struck by hazards from equipment and supply carts while being used for welding operations, on or about March 08, 2018. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100215 A04 |
| Issuance Date |
2018-09-05 |
| Abatement Due Date |
2018-09-17 |
| Current Penalty |
7114.0 |
| Initial Penalty |
7114.0 |
| Final Order |
2018-09-28 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: (a) For employees using the Central Machinery 6" Bench Grinder with a 1.5 inch opening from the work rest to the grinding stone which was being used to smooth ends of cut piping of exhaust systems, on or about March 08, 2018. |
|
| Citation ID |
01003 |
| Citaton Type |
Serious |
| Standard Cited |
19100215 B09 |
| Issuance Date |
2018-09-05 |
| Abatement Due Date |
2018-09-17 |
| Current Penalty |
4268.0 |
| Initial Penalty |
4268.0 |
| Final Order |
2018-09-28 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) For employees using the Central Machinery 6" Bench Grinder for smoothing ends of cut piping of exhaust systems without an adjustable tongue guard, on or about March 08, 2018. |
|
| Citation ID |
01004 |
| Citaton Type |
Serious |
| Standard Cited |
19100304 G05 |
| Issuance Date |
2018-09-05 |
| Abatement Due Date |
2018-09-17 |
| Current Penalty |
5691.0 |
| Initial Penalty |
5691.0 |
| Final Order |
2018-09-28 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: (a) For employees smoothing edges of cut piping while using Model 39797, 120v - 60Hz 1/2HP Central Machinery 6" Bench Grinder with a three prong electrical power cord where its power supply was a two prong plug extension cord, on or about March 09 2018. |
|
| Citation ID |
02001 |
| Citaton Type |
Repeat |
| Standard Cited |
5A0001 |
| Issuance Date |
2018-09-05 |
| Abatement Due Date |
2018-09-20 |
| Current Penalty |
9959.0 |
| Initial Penalty |
9959.0 |
| Final Order |
2018-09-28 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to potential crushing hazards from hydraulic lifts: a) For employees using the hydraulic lift leaking fluid located in the first bay of the repair shop to lift cars for repairs, on or about 03/08/2018. |
|
| Citation ID |
02002 |
| Citaton Type |
Repeat |
| Standard Cited |
19100305 B01 |
| Issuance Date |
2018-09-05 |
| Abatement Due Date |
2018-09-17 |
| Current Penalty |
284.0 |
| Initial Penalty |
284.0 |
| Final Order |
2018-09-28 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(b)(1): Conductors entering boxes, cabinets, or fittings were not protected from abrasions: (a) For employees operating an outside automotive hydraulic lift where conduit used to power its motor was pulled away from the base of the entrance point, on or about March 08, 2018. (b) For an outside automotive hydraulic lift where conduit used for power located at the foot of the lift was not continuous exposing wiring to abrasions, on or about March 08, 2018. (c) For the pipe bender located outside the rear of the building where electrical wiring conduit with openings was covered with black tape was secured to a chain link by nylon ties, exposing it to abrasions, on or about March 08, 2018. The Bigmechanic.com, Inc. dba The Original Muffler City, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.305 (b)(1), which was contained in OSHA inspection number1242726, citation number 02, item number 004 and was affirmed as a final order on 10/23/2017, with respect to a workplace located at 815 E. Hillsborough Ave. Tampa, FL 33604. |
|
| Citation ID |
03001 |
| Citaton Type |
Other |
| Standard Cited |
19100254 D09 III |
| Issuance Date |
2018-09-05 |
| Abatement Due Date |
2018-09-17 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-09-28 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.254(d)(9)(iii): Cables with damaged insulation or exposed bare conductors were not replace: (a) For employees using welding equipment to cut metal parts were using welding cables where cuts were observed, on or about March 08, 2018. |
|
|
|
342433703
|
0420600
|
2017-06-28
|
1210 E FLETCHER AVE., TAMPA, FL, 33612
|
|
| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2017-06-28
|
| Case Closed |
2023-04-12
|
Related Activity
| Type |
Complaint |
| Activity Nr |
1223263 |
| Safety |
Yes |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
5A0001 |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-10-11 |
| Current Penalty |
5070.0 |
| Initial Penalty |
5070.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
2 |
| Nr Exposed |
2 |
| Gravity |
10 |
| FTA Inspection NR |
1300220 |
| FTA Issuance Date |
2018-09-05 |
| FTA Current Penalty |
5174.0 |
| FTA Final Order Date |
2018-10-02 |
| Citation text line |
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to potential crushing hazards from hydraulic lifts: a) For the hydraulic lift that was located outside, exterior to the building, as observed on or about 06/28/2017, hydraulic lines were cracked and damaged resulting in the potential for hydraulic leaks to occur. b) For an interior hydraulic lift, as observed on or about 06/28/2017, safety stops were not functioning properly and were attached to a bungee cord. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100022 D01 |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-10-03 |
| Current Penalty |
2897.0 |
| Initial Penalty |
2897.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.22(d)(1): Walking-working surfaces were not inspected, regularly, and maintained in a safe condition. a) For the area where material was stored next to the exterior hydraulic lift, as observed on or about 06/28/2017, floor holes of over 5 inches wide were present that created a trip hazard for employees. |
|
| Citation ID |
01003A |
| Citaton Type |
Serious |
| Standard Cited |
19100132 D01 I |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-10-03 |
| Current Penalty |
2173.0 |
| Initial Penalty |
2173.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.132(d)(1)(i): The employer did not select and have each affected employee use, the types of personal protective equipment that would protect the affected employee(s) from the hazards identified in the hazard assessment: For the auto shop, as observed on or about 06/28/2017: a) employees handled chemicals such as, but not limited to, brake cleaner, brake fluid, oil, and lubricants and worked underneath vehicles where chemicals could contact eyes. Employees also use a metal chop saw that produced fine shavings. Eye protection was not available. b) employees handled chemicals such as, but not limited to, brake cleaner, brake fluid, oil, and lubricants and worked underneath vehicles where chemicals could contact and hands. Hand protection/gloves was not available. |
|
| Citation ID |
01003B |
| Citaton Type |
Serious |
| Standard Cited |
19100132 D02 |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-10-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
1 |
| FTA Inspection NR |
1300220 |
| FTA Issuance Date |
2018-09-05 |
| FTA Current Penalty |
2217.0 |
| FTA Final Order Date |
2018-10-02 |
| Citation text line |
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed: a) For the auto shop, as observed on or about 06/28/2017, employees handled chemicals such as, but not limited to, brake cleaner, brake fluid, oil, and lubricants and worked underneath vehicles where chemicals could contact eyes and hands. Employees also used a chop saw that produced metal shavings/flyings. A written certification of a hazard assessment was not available. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100141 A03 I |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-10-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.141(a)(3)(i): Places of employment were not kept clean to the extent that the nature of the work allowed: a) For the employee bathroom, as observed on or about 06/28/2017, the bathroom was dirty and in need of cleaning. The sink had dirt accumulation and the toilet, floor and walls were visibly dirty. |
|
| Citation ID |
02002 |
| Citaton Type |
Other |
| Standard Cited |
19100141 A04 II |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-09-28 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.141(a)(4)(ii): Wastes were not collected and removed as often as necessary to maintain the place of employment in a sanitary condition: a) For the employee bathroom, as observed on or about 06/28/2017, the waste receptacle was over-filled with waste, and the floor was littered with waste. |
|
| Citation ID |
02003 |
| Citaton Type |
Other |
| Standard Cited |
19100141 D02 III |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-09-29 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.141(d)(2)(iii): Lavatories were not provided with hand soap or similar cleansing agent: a) For the auto shop, as observed on or about 06/28/2017, there was no hand soap in the employees' bathroom. |
|
| Citation ID |
02004 |
| Citaton Type |
Other |
| Standard Cited |
19100253 B02 IV |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-09-28 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.253(b)(2)(iv): Valve protection caps, where cylinders were designed to accept caps, were not always in place, hand-tight, except when cylinders were in use or connected for use: a) For the shop location, as observed on or about 06/27/2017, an oxygen cylinder in storage was missing a valve cap. |
|
| Citation ID |
02005 |
| Citaton Type |
Other |
| Standard Cited |
19100253 B04 III |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-09-29 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Inspection NR |
1300220 |
| FTA Issuance Date |
2018-09-05 |
| FTA Current Penalty |
400.0 |
| FTA Final Order Date |
2018-10-02 |
| Citation text line |
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour: a) For the auto shop, as observed on or about 06/27/2017, acetylene cylinders were stored directly adjacent to oxygen cylinders. |
|
| Citation ID |
02006 |
| Citaton Type |
Other |
| Standard Cited |
19100303 F02 |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-10-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: a) For the auto shop, as observed on or about 06/28/2017, the breaker panel controlling branch circuits that controlled equipment such as, but not limited to, lighting was not clearly labeled. |
|
| Citation ID |
02007 |
| Citaton Type |
Other |
| Standard Cited |
19100305 B01 I |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-10-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasions: a) For the conduit used to power hydraulic lifts, as observed on or about 06/27/2017, conduit was disconnected from lifts' electrical boxes resulting in potential abrasion to the inner wiring. |
|
| Citation ID |
02008 |
| Citaton Type |
Other |
| Standard Cited |
19100305 C04 |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-10-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(c)(4): Snap switches mounted in boxes did not have faceplates installed so as to completely cover the opening and seat against the finished surface. a) For the auto shop, as observed on about 06/28/2017, a light switch/snap switch by the cut-off saw was missing its cover. |
|
| Citation ID |
02009 |
| Citaton Type |
Other |
| Standard Cited |
19101200 E01 |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-10-11 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Inspection NR |
1300220 |
| FTA Issuance Date |
2018-09-05 |
| FTA Current Penalty |
400.0 |
| FTA Final Order Date |
2018-10-02 |
| Citation text line |
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) For the auto shop, as observed on or about 06/28/2017, chemicals such as, but not limited to, oil, brake cleaner, transmission fluid, and other automotive fluids were used daily. A written hazard communication program was not implemented. |
|
|
|
342427267
|
0420600
|
2017-06-27
|
815 E HILLSBOROUGH AVE., TAMPA, FL, 33604
|
|
| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2017-06-27
|
| Case Closed |
2024-04-03
|
Related Activity
| Type |
Complaint |
| Activity Nr |
1223220 |
| Safety |
Yes |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
5A0001 |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-10-11 |
| Current Penalty |
5070.0 |
| Initial Penalty |
5070.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to potential crushing hazards from hydraulic lifts: a) For the hydraulic lifts used on site, as observed on or about 06/27/2017, safety stops failed to deploy as the lift was in raised positions exposing employees to potential crushing hazards. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100253 B02 IV |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-09-28 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.253(b)(2)(iv): Valve protection caps, where cylinders were designed to accept caps, were not always in place, hand-tight, except when cylinders were in use or connected for use: a) For the shop location, as observed on or about 06/27/2017, an acetylene cylinder in storage was missing a valve cap. |
|
| Citation ID |
02002 |
| Citaton Type |
Other |
| Standard Cited |
19100253 B04 III |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-09-29 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Inspection NR |
1300062 |
| FTA Issuance Date |
2018-09-05 |
| FTA Current Penalty |
700.0 |
| FTA Final Order Date |
2018-09-28 |
| Citation text line |
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour: a) For the auto shop, as observed on or about 06/27/2017, acetylene cylinders were stored directly adjacent to oxygen cylinders. |
|
| Citation ID |
02003 |
| Citaton Type |
Other |
| Standard Cited |
19100303 B02 |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-09-28 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a) For the shop, as observed on or about 06/27/2017, a yellow extension cord was ripped and spliced with electrical tape. This condition does not comply the cord's original design/listing and labeling. b) For the shop, as observed on or about 06/27/2017, the power cord for a chop saw was spliced into another power cord and taped together. This condition does not comply with the equipment's original design/listing or labeling. |
|
| Citation ID |
02004 |
| Citaton Type |
Other |
| Standard Cited |
19100305 B01 I |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-10-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasions: a) For the conduit used to power hydraulic lifts, as observed on or about 06/27/2017, conduit was cracked at the entrance point to fittings resulting in the potential for the abrasion of interior wiring. |
|
| Citation ID |
02005 |
| Citaton Type |
Other |
| Standard Cited |
19100305 G02 III |
| Issuance Date |
2017-09-21 |
| Abatement Due Date |
2017-10-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-10-24 |
| Nr Instances |
2 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: For the auto shop, as observed on or about 06/27/2017, the following strain relief hazards were present: a) The power cord for the pipe bender had no strain relief at its plug resulting in strain being placed on the inner conductors. b) A red extension cord had insulation revoved at its plug resulting in a lack of strain relief |
|
|
|
339259855
|
0420600
|
2013-08-07
|
815 EAST HILLSBOROUGH AVENUE, TAMPA, FL, 33604
|
|
| Inspection Type |
FollowUp
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2013-08-07
|
| Case Closed |
2013-12-18
|
Related Activity
| Type |
Inspection |
| Activity Nr |
830041 |
| Safety |
Yes |
|
| Type |
Inspection |
| Activity Nr |
899647 |
| Safety |
Yes |
|
|
|
338996473
|
0420600
|
2013-04-09
|
815 E. HILLSBOROUGH AVE., TAMPA, FL, 33604
|
|
| Inspection Type |
FollowUp
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2013-04-09
|
| Case Closed |
2013-12-18
|
Related Activity
| Type |
Complaint |
| Activity Nr |
377308 |
| Safety |
Yes |
|
| Type |
Inspection |
| Activity Nr |
830041 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Repeat |
| Standard Cited |
19100151 C |
| Issuance Date |
2013-05-01 |
| Abatement Due Date |
2013-05-13 |
| Current Penalty |
80.0 |
| Initial Penalty |
80.0 |
| Final Order |
2013-05-30 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Inspection NR |
925985 |
| FTA Issuance Date |
2013-08-15 |
| FTA Current Penalty |
0.0 |
| FTA Final Order Date |
2013-09-11 |
| Citation text line |
29 CFR 1910.151(c): Where the eyes or body of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area for immediate emergency use. a) For the Auto Air Muffler and Brake City establishment at 815 E. Hillsborough Ave., Tampa, FL 33604, as observed on or about 04/09/2013, an eyewash station was not available for employees who were potentially exposed to battery acid. |
|
|
|
338300411
|
0420600
|
2013-01-16
|
815 E. HILLSBOURGH AVE., TAMPA, FL, 33604
|
|
| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2013-01-16
|
| Case Closed |
2013-12-18
|
Related Activity
| Type |
Complaint |
| Activity Nr |
377308 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
5A0001 |
| Issuance Date |
2013-02-07 |
| Abatement Due Date |
2013-02-14 |
| Current Penalty |
2000.0 |
| Initial Penalty |
2000.0 |
| Final Order |
2013-03-07 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment that was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by/crushing hazards associated with a modified and defective hydraulic automotive lift: a) For the Auto Air Muffler and Brake City establishment at 815 E. Hillsborough Ave., Tampa, FL 33604, as observed on or about 01/16/2013, employees were exposed to struck-by/crushing hazards while working underneath pneumatic/hydraulic vehicle lifts. Safety stops had been bypassed, such that the two indoor lifts were supported only by hydraulics and could crush employees working underneath in event of a hydraulic failure. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100151 C |
| Issuance Date |
2013-02-07 |
| Abatement Due Date |
2013-02-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-03-07 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) For the Auto Air Muffler and Brake City establishment at 815 E. Hillsborough Ave., Tampa, FL 33604, as observed on or about 10/16/2013, an eyewash station was not available for employees who were potentially exposed to battery acid. |
|
|
