|
345088678
|
0419700
|
2021-01-04
|
10301 BUSCH DRIVE NORTH, JACKSONVILLE, FL, 32218
|
|
| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2021-01-06
|
| Emphasis |
N: AMPUTATE
|
| Case Closed |
2021-08-06
|
Related Activity
| Type |
Complaint |
| Activity Nr |
1710823 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C04 II |
| Issuance Date |
2021-06-16 |
| Abatement Due Date |
2021-07-21 |
| Current Penalty |
7099.56 |
| Initial Penalty |
13653.0 |
| Final Order |
2021-07-12 |
| Nr Instances |
1 |
| Nr Exposed |
19 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to items (a) through (d) of this section: a. On or about January 4, 2021, at the Bindery Department, the employer's Equipment Lockout/Tagout Procedures did not specifically outline the scope, purpose, rules and steps for the control the hazardous energy for equipment with more than one source of hazardous energy and potential to release stored energy, such as but not limited to, the Muller Martini' s Bravo Feeder, Saddle Stitcher and Three Knife Trimmer, the Muller Martini's Zenith Three Knife Trimmer, and ARPAC Shrink Wrapper, among other machinery. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C07 I |
| Issuance Date |
2021-06-16 |
| Abatement Due Date |
2021-08-03 |
| Current Penalty |
7099.56 |
| Initial Penalty |
13653.0 |
| Final Order |
2021-07-12 |
| Nr Instances |
1 |
| Nr Exposed |
19 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(7)(i):The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: a. On or about January 4, 2021, at the Bindery Department, for affected employees and those required to service machinery with more than one source of hazardous energy. The employer failed to train their employees on the purpose and function of the company's Lockout/Tagout Program, exposing employees to caught-in and amputation hazards. |
|
| Citation ID |
02001 |
| Citaton Type |
Repeat |
| Standard Cited |
19100212 A01 |
| Issuance Date |
2021-06-16 |
| Current Penalty |
39047.84 |
| Initial Penalty |
75092.0 |
| Final Order |
2021-07-12 |
| Nr Instances |
4 |
| Nr Exposed |
14 |
| Related Event Code (REC) |
Complaint |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a. On or about January 4, 2021, at the Bindery Department, the employer allowed the Zenith #A three knife trimmer machine to be operated with the rear guard door open, in that the door pin was broken and interlock safety switch was disconnected, which allowed the operator to run the machine with the door open, exposing employees to amputation hazards. b. On or about January 4, 2021, at the Bindery Department, the employer allowed the Zenith #B three knife trimmer machine to be operated without the protective guard at the rotating motor belts, exposing employees to caught-in hazards. c. On or about January 4, 2021, at the Bravo #2 in the Bindery Department, the employer allowed the RIMA stackers to be operated without protective guards in the feeder belt area and turntable/stack pusher area, exposing employees to caught-in and amputation hazards. d. On or about January 4, 2021, at the Bravo #1 and Norm A in the Bindery Department, the employer allowed the RIMA stackers to be operated without protective guards in the turntable/stack pusher area, exposing employees to caught-in and amputation hazards. The employer, Trend Offset Printing Services, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.212(a)(1), which was contained in OSHA inspection number 1356685, citation number 1, item number 1 and was affirmed as a final order on April 24, 2019, with respect to a workplace located at 10301 Busch Drive North, Jacksonville, FL 32218. |
|
| Citation ID |
03001 |
| Citaton Type |
Repeat |
| Standard Cited |
19101200 F06 II |
| Issuance Date |
2021-06-16 |
| Current Penalty |
557.96 |
| Initial Penalty |
1073.0 |
| Final Order |
2021-07-12 |
| Nr Instances |
2 |
| Nr Exposed |
19 |
| Related Event Code (REC) |
Complaint |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical: a. On or about January 4, 2021, at the Bindery Department, the employer did not ensure a secondary bottle found by Bravo 3 and another found by Bravo 2, used by employees to lubricate the machines, were labeled tagged or marked with a product identifier and at least general information regarding the hazards of the chemicals, exposing employees to skin and eye injuries. The employer, Trend Offset Printing Services, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.1200(f)(6)(ii), which was contained in OSHA inspection number 1356685, citation number 2, item number 1 and was affirmed as a final order on April 24, 2019, with respect to a workplace located at 10301 Busch Drive North, Jacksonville, FL 32218. |
|
|
|
343566857
|
0419700
|
2018-10-29
|
10301 BUSCH DRIVE NORTH, JACKSONVILLE, FL, 32218
|
|
| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2019-02-25
|
| Emphasis |
N: AMPUTATE
|
| Case Closed |
2020-08-19
|
Related Activity
| Type |
Complaint |
| Activity Nr |
1394018 |
| Safety |
Yes |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A01 |
| Issuance Date |
2019-04-09 |
| Current Penalty |
8619.0 |
| Initial Penalty |
13260.0 |
| Final Order |
2019-04-24 |
| Nr Instances |
4 |
| Nr Exposed |
6 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On or about October 29-30, 2018: At the Prima #1 machine infeed section door and the shear press back door guarding were not effective since the interlocks safety switches were disconnected which allowed the operator to run the machine with doors open; exposing employees to amputation hazards. b) On or about October 29-30, 2018: At the Prima #2 machine the infeed section door was broken and the shear press doors guarding were not effective since the interlocks safety switches were disconnected which allowed the operator to run the machine with doors open; exposing employees to amputation hazards. c) On or about October 29-30, 2018: At the Bravo #1 machine the stitcher door, infeed section doors, shear press doors guarding were not effective since the interlocks safety switches were disconnected which allowed the operator to run the machine with doors open, and shear press back door guard was broken; exposing employees to amputation hazards. d) On or about October 29-30, 2018: At the Bravo #2 machine the stitcher door and shear press doors guarding were not effective since the interlocks safety switches were disconnected and allowed operators to open the doors while the machine was in operation; exposing the operator to amputation hazards. |
|
| Citation ID |
02001 |
| Citaton Type |
Repeat |
| Standard Cited |
19101200 F06 II |
| Issuance Date |
2019-04-09 |
| Current Penalty |
245.7 |
| Initial Penalty |
378.0 |
| Final Order |
2019-04-24 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical: a) On or about October 30, 2018: Two bottles were found near the Prima #2 machine area that employees use to lubricate the machines, the employer did not ensure that each secondary container of hazardous chemicals were labeled, tagged or marked in accordance with OSHA standards and exposed employees to skin and eye injuries. Trend Offset Printing Services, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.1200(f)(6)(ii), which was contained in OSHA inspection number 1276885, citation number 1, item number 1 and was affirmed as a final order on December 29, 2017 , with respect to a workplace located at 10301 Busch Drive North Jacksonville, FL 32218. |
|
|
|
342768850
|
0419700
|
2017-11-15
|
10301 BUSCH DRIVE, JACKSONVILLE, FL, 32218
|
|
| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2017-11-17
|
| Emphasis |
N: AMPUTATE, L: FORKLIFT, P: AMPUTATE
|
| Case Closed |
2018-09-13
|
Related Activity
| Type |
Complaint |
| Activity Nr |
1283326 |
| Safety |
Yes |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Other |
| Standard Cited |
19101200 F06 II |
| Issuance Date |
2017-12-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-12-29 |
| Nr Instances |
1 |
| Nr Exposed |
285 |
| Related Event Code (REC) |
Complaint |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical: a. On or about November 15, 2017, within the facilities Production areas, the employer did not ensure that each secondary container of hazardous chemicals was labeled, tagged or marked in accordance with the OSHA standard and exposed employees to skin, eye and organ injuries. |
|
|
|
342140555
|
0419700
|
2017-02-23
|
10301 BUSCH DR. NORTH, JACKSONVILLE, FL, 32218
|
|
| Inspection Type |
Complaint
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2017-02-24
|
| Emphasis |
N: AMPUTATE
|
| Case Closed |
2017-06-22
|
Related Activity
| Type |
Complaint |
| Activity Nr |
1184456 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Other |
| Standard Cited |
19100037 B02 |
| Issuance Date |
2017-05-02 |
| Abatement Due Date |
2017-05-12 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-05-26 |
| Nr Instances |
1 |
| Nr Exposed |
14 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": a. On or about February 23, 2017, the exit from the HAZMAT Storage Room was not marked with signage. |
|
| Citation ID |
01002 |
| Citaton Type |
Other |
| Standard Cited |
19100151 C |
| Issuance Date |
2017-05-02 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-05-26 |
| Nr Instances |
1 |
| Nr Exposed |
14 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a. On or about February 23, 2017, in the HAZMAT Storage Room, the emergency eyewash station was obstructed by debris and was not available for immediate emergency use by employees who dispense corrosive chemicals. |
|
|
|
339440281
|
0419700
|
2013-10-21
|
10301 BUSCH DRIVE NORTH, JACKSONVILLE, FL, 32218
|
|
| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2013-10-22
|
| Emphasis |
L: FORKLIFT
|
| Case Closed |
2014-01-13
|
Related Activity
| Type |
Complaint |
| Activity Nr |
856192 |
| Safety |
Yes |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C04 I |
| Issuance Date |
2013-11-22 |
| Abatement Due Date |
2013-12-27 |
| Current Penalty |
4200.0 |
| Initial Penalty |
7000.0 |
| Final Order |
2013-12-16 |
| Nr Instances |
1 |
| Nr Exposed |
6 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a. On or about October 21, 2013, the employer did not develop, document or utilize written specific lockout/tagout procedures for employees that repaired and/or serviced various equipment at the facility, such as but not limited to the air compressor, water chiller, and presses. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C07 I A |
| Issuance Date |
2013-11-22 |
| Abatement Due Date |
2013-12-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-12-16 |
| Nr Instances |
1 |
| Nr Exposed |
6 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolatation: a. On or about October 21, 2013, all authorized employees did not receive training on the company's specific lockout tagout program to ensure that the purpose and function of the energy control program was underdstood. |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C07 I B |
| Issuance Date |
2013-11-22 |
| Abatement Due Date |
2013-12-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-12-16 |
| Nr Instances |
1 |
| Nr Exposed |
80 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure: a. On or about October 21, 2013, all affected employees did not receive training on the purpose or use of the company's specific lockout tagout program. |
|
| Citation ID |
01001D |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C06 I |
| Issuance Date |
2013-11-22 |
| Abatement Due Date |
2013-12-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-12-16 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a. On or about October 21, 2013, the employer did not conduct a periodic inspection of the energy control program. |
|
|
